A little more done after a few very hot days when nothing happenned.
Removing sealing rubbers from around doors ready to smooth them off and respreay.
An exercise in secret society induction as you have to do it the correct way, in the correct order while mutterring the correct incantations,
The Boot seal rubber in place
Boot seal rubber profile
Fuel filler pipe grommet, fits in floor of boot,
The hole it goes in.
Widening the spare wheel well has changed the shape of the hole so we may need a special seal here.
The door seal in place
The door seal profile
The front door door seal front attachment
Four screws through a moulded in piece.
Some re-engineering of available seals may be required in this area.
Some re-engineering of available seals may be required in this area.
Removing the rear door fixed glass
Removing this glass first requires the total dismantling of the door.
Removal of the winding window, winder mechanism, inner and outer anti rattle dust seals and the bailey channel in the top of the door. This allows the window to be shifted forward and then lifted out.
Only want to do this task once :-)
No comments:
Post a Comment