This is a Blog following the construction of an Improved 1966 Humber Vogue with Mitsubishi V6 engine and 5 speed transmission
Subscribe to:
Post Comments (Atom)
Accelerator pedal
Had a spare moment from all the priorities and thought I would hook up the accelerator pedal. When I was doing the brake upgrade installati...
-
Had a spare moment from all the priorities and thought I would hook up the accelerator pedal. When I was doing the brake upgrade installati... -
The Vogue crept into my life as a sight unseen purchase for some useful parts for a 1957 series 1 Sunbeam Rapier that needed rebuilding. Ch... -
Well the first go at making block hugging headers was a bit of a disaster. The good outcome was that I could see that it was possible to do...
The exhaust headers have de-evolved from tuned equal length to get the gas out of here and fit into the space.
ReplyDeleteVery time consuming with the tight bends out of the ports and all coming together.
Light vehicle modification rules require all emission control features supplied with the later engine are maintained. So this will require the fitment of the original CAT and O2 sensor. Fortunately all this stuff came with the donor Pajero so I will just reshape it all to fit under the Vogue.
The headers will fit into this.
Muffler and tail pipes still to be thought about.
Didn't work the way I was going so back to square one and tried again.
ReplyDeleteSome better materials and a little more pipe shaping was called for.